Range · 05 · 2K clearcoats
2K clearcoats. Six lines, all 2 : 1.
From an economy MS to a VHS that covers a whole car in one and a half coats. Every line mixes 2 : 1 with its own hardener, so your customers learn one habit. Delivered under your brand, with your codes, in your pack sizes.
- Lines
- 6
- Mixing
- 2 : 1 by volume, all lines
- Classes
- MS · MS SR · HS · VHS
- Packs
- 0.5 · 1 · 5 L · kits
Technical card
The numbers behind the tin. HS line shown.
Data-sheet values of the standard HS formulation. Gloss, cure speed and viscosity are then adjusted for your market and your booths, and the adjusted values go into your own technical data sheet.
Product
- Type
- 2K acrylic clearcoat, high solids
- Use
- Full resprays and spot repairs over basecoat
- Gloss
- High gloss, deep finish [GU, 60°]
- Solids by weight
- [to be confirmed]
- VOC, ready to use
- 510 g/l · [VOC category and export version to be confirmed]
- Colour
- Clear, non-yellowing
Application
- Mixing ratio
- 2 : 1 by volume (100 : 50 by weight)
- Hardener
- Dedicated HS hardener, 0.5 L and 2.5 L
- Thinner
- 0 to 10 %, slow, standard or fast by temperature
- Pot life, 20 °C
- 2 h
- Spray viscosity
- 17–19 s DIN 4, 15–17 s with 10 % thinner
- Coats
- 2 · 1.3–1.4 mm at 2.5–4 bar · 30–35 µm dry
- Flash-off
- 5–10 min between coats
Drying
- Dust-free, 20 °C
- 20–25 min · touch-dry 50–60 min
- Handling hardness, 20 °C
- 8 h · full cure 7 days
- Bake, 60 °C
- 45 min, then 3 days at 20 °C to full hardness
- IR
- 10–25 min, not earlier than 10 min after the last coat
- Polishable
- After full cure
Logistics
- Packs
- 1 L · 5 L · kit 1 L + 0.5 L hardener
- Pallet
- 768 × 1 L, 8 layers, cartons of 6
- Minimum
- One production batch [litres, to be confirmed]
- Shelf life
- 24 months unopened at 20 °C
- Transport
- UN 1263 · class 3 · [PG]
- Storage
- 5 to 25 °C, dry, original pack
Compare the six lines
Two lines cover most shelves. The third is the premium tier.
All six mix 2 : 1 with a dedicated hardener. The line you pick sets your price tier and how your customers work: with a booth, without one, one and a half coats or three.
| MSEconomy | MS SRScratch resistant | SR MultiDirect to metal and plastics | HSStandard | HS AirNo bake | VHSPremium | |
|---|---|---|---|---|---|---|
| Our ref. | CC-MS-35 | CC-SR-45 | CC-SR-47 | CC-HS-55 | CC-HA-65 | CC-VH-75 |
| Class | Medium solids | Medium solids, scratch resistant | Scratch resistant, adhesion to alu, zinc, stainless, PP | High solids | High solids, air drying | Very high solids |
| Mixing | 2 : 1 | 2 : 1 | 2 : 1 | 2 : 1 | 2 : 1 | 2 : 1 |
| Thinner | – | 0–10 % | – | 0–10 % | – | – |
| Viscosity, DIN 4 | 15–18 s | 17–19 s | 16–19 s | 17–19 s | 15–18 s | 15–18 s |
| Coats · dry film | 2–3 · 40 µm | 2–3 · 20–30 µm | 2–3 · [µm] | 2 · 30–35 µm | 2 · 30–40 µm | 1.5 · 30–40 µm |
| Pot life, 20 °C | 1 h | 2 h | 2 h | 2 h | [h] | 45 min |
| Dust-free, 20 °C | 20 min | 20 min | [min] | 20–25 min | 15 min | 20 min |
| Handling hardness, 20 °C | 8 h | 12 h | 12 h | 8 h | 2 h touch-dry | 3 h |
| Full cure, 20 °C | 6 days | 7 days | [days] | 7 days | 3 days | 3 days |
| Bake, 60 °C | 30 min | 45 min | 45 min | 45 min | 5 min | 5 min |
| VOC, ready to use | 580 g/l | 580 g/l | [g/l] | 510 g/l | 525 g/l | [g/l] |
| Lab scores · drying / yield / flow / durability | 3.5 · 3.5 · 4 · 4 | 3 · 3.5 · 4 · 4 | 3 · 4 · 4.5 · 5 | 3 · 4 · 4.5 · 5 | 5 · 4 · 4.5 · 5 | 4.5 · 5 · 5 · 5 |
| Best for | High-volume bodyshops, price-led ranges | Everyday repair with scratch resistance | Wheels, trims, mixed substrates without primer | The default line for general repair | Smart repair without a booth | Whole-car resprays, premium tier |
VOC: data-sheet values of the current formulations; [VOC category per 2004/42/EC and a 420 g/l export version to be confirmed] · Lab scores: manufacturer's panel ratings, 1 to 5 · Times refer to panel temperature
Your line · confirmed on your panels
Set for your line
Six starting points. Your line ends somewhere else.
Every clearcoat line is confirmed on the customer's own panels before the first batch. What we set, and fix in writing:
- GlossFull gloss or adjusted for your market's finish expectation
- CureHardener pairing and cure profile matched to your booths and climate
- ViscositySet for your customers' guns and habits, not a generic average
- PacksYour sizes, your kits, your carton counts
- CodesYour article numbers on tin, carton, pallet and every document
- ExclusivityYour recipe stays yours. Territorial exclusivity by agreement
Documents
What arrives with the line.
Every document is issued in the buyer's name and in the languages of the markets you sell in. Safety data sheets are issued to contracted customers only and live in the customer zone, not on this page.
Public
This page
Base parameters of the standard formulations, as above. Enough to decide whether the product fits your range.
You are reading itCustomer zone
Technical data sheet
Your brand, your codes, your adjusted values. Versioned, dated, in your languages.
On contractCustomer zone
Safety data sheet
CLP-compliant, with UFI, written from our own formulation. Notified to the poison centres of your markets.
On contractWith every delivery
Certificate of analysis
Batch number, measured values against the agreed specification, retained sample reference.
Per batchBefore first batch
Label proof and VOC declaration
Your artwork checked against CLP, VOC category and transport marking. Signed off before print.
On contractCustomer zone: [after company registration, login for contracted customers]
Goes with
One system, one label.
A clearcoat sells with its hardener and thinner, as a kit under one code. Each family has its own page with the same comparison.
Samples
Two tins, in your booth next week.
Tell us which lines, whether your customers bake, and which markets. Sample tins ship in the first week, with the base technical card. Your tests, your pace.
- [address to be confirmed]
- Phone
- [number to be confirmed]
- Languages
- English · Deutsch · Polski
- Replies
- within one working day